Visit Our New Flag Case & Memorial Website

---

 

"M"-Winches
The "M"-Winch is gearless and self-locking at any point, eliminating the need for a separate brake. this direct drive winch provides for rapid raising & lowering of the flag with little effort. This improved design does not require any welding thus avoiding discoloration when an anodized finish is required. No monthly lubrication is needed and this winch is easily adaptable to existing on-site flagpoles. The winch is inserted into the pole and secured with a stainless steel bolt on the back side of the pole.

These winches are available for use on flagpoles with a butt diameter of 6" or larger. These gearless winches utilize cast bronze internal brakes which release when a winch handle is inserted and rotational pressure is applied. The winch is locked at any position by removing the handle which engages the brake system. The small size is generally used on flagpoles up to 45', the large size is used on flagpoles from 50' through 80' and the X-Large size is used on flagpoles higher than 80'. The winch is mounted to the inside of the flagpole with two 5/16"-18NC stainless steel bolts with mounting centers being 3 ½". Recommended diameters of stainless steel cable are 1/8" or 5/32".

Model	Item #	Size	Min. Pole Opening		Drum Width	Price
			Height	Width
SSW1	E360047	Small	3 1/8"	4 1/8"	1 ½"	$350.00
SSW2	E360048	Large	3 5/8"	4 1/8"	2"	350.00
SSW3	E360049	X-Large	6 5/8"	4 1/8"	5"	600.00

*The above pricing does not include a winch handle; see pricing below.

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Handle for Stainless Steel Winches
This winch handle is designed to be used with any of the stainless steel winches described at the left.

Model	Item #	Price
WH1	E360051	$30.00

 

Mounted

Cam Action Cleats Used in rope style internal halyard flagpoles. the mounted version is secured onto a 1 ½" x 3 3/8" aluminum block with two #10-32NC stainless steel pan head screws. Both versions are supplied with two #10-32NC stainless steel mounting screws. Recommended maximum rope diameter is 5/16".

Unmounted

Item #	Description	Distance Between Bolt Centers	Price
E360052	Mounted	2 15/16"	$17.00
E360053	Unmounted	2"	12.80

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Winch Lubricant This silicone based aerosol spray is ideal to help keep stainless steel winches operating at peak performance ("M"-type winches do not require any lubrication.) Item # Price E360050 $10.00

 

Cable Assemblies

Constructed of 1/8" and/or 3/16" stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect of unraveling due to the rotation of the truck assembly. The lower cable section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if the winch is an "M"-type which does not require a cable stop. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. These standard cable assemblies are designed for flagpoles with a winch installed at 5' above grade. Call, write or fax for a prompt quotation on non-standard cable assemblies.

Click Item Number To Add To Cart Note: You Can Remove It Later!

Model	Exposed Height of Flagpole	Lower Cable		Upper Cable		Price
		Diameter	Length	Diameter	Length
E360056	20'	3/32"	20'	1/8"	20'	$ 72.00
E360332	25'*	3/32"	25'	1/8"	25'	79.00
E360057	25'	1/8"	25'	1/8"	25'	79.00
E360333	30'*	3/32"	30'	1/8"	30'	85.00
E360058	30'	1/8"	30'	1/8"	30'	85.00
E360334	35'*	3/32"	35'	1/8"	35'	91.00
E360059	35'	1/8"	35'	1/8"	35'	91.00
E360060	40'	1/8"	40'	3/16"	40'	99.00
E360061	45'	1/8"	45'	3/16"	45'	105.00
E360062	50'	1/8"	50'	3/16"	50'	113.00
E360063	60'	1/8"	60'	3/16"	60'	126.00
E360064	70'	1/8"	70'	3/16"	70'	141.00
E360065	78'	1/8"	78'	3/16"	78'	153.00
E360066	80'	1/8"	80'	3/16"	80'	155.00
E360067	90'	1/8"	90'	3/16"	90'	202.00
E360068	100'	1/8"	100'	3/16"	100'	218.00
E360069	110'	1/8"	110'	3/16"	110'	223.00
E360070	120'	1/8"	120'	3/16"	120'	227.00
E360071	130'	1/8"	130'	3/16"	130'	263.00
E360072	140'	1/8"	140'	3/16"	140'	273.00
E360073	150'	1/8"	150'	3/16"	150'	294.00
E360074	160'	1/8"	160'	3/16"	160'	315.00
E360075	170'	1/8"	170'	3/16"	170'	336.00
E360076	180'	1/8"	180'	3/16"	180'	368.00
E360077	190'	1/8"	190'	3/16"	190'	399.00
E360078	200'	1/8"	200'	3/16"	200'	441.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Flag Arrangements
Constructed of 1/8" stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangements provide the method of attaching the flag or flags to the cable assembly. This is also an excellent method for changing the quantity of flags or the size(s) of a flag(s) without having to change the entire cable assembly. Each arrangement is supplied with either 2 or 3 stainless steel quick links depending on the recommended flag size. Flag snaps are NOT included.

Model	Item #	For Flag Size	# Of Quick Links Supplied	Price
FA2	E360079	2' x 3'	2	$29.00
FA25	E360080	2 ½' x 4'	2	32.00
FA3	E360081	3' x 5'	2	33.00
FA4	E360082	4' x 6'	2	35.00
FA5	E360083	5' x 8' or 5' x 9 ½'	2	37.00
FA6	E360084	6' x10'	2	41.00
FA8	E360085	8' x 12'	2	86.00
FA10	E360086	10' x 15' or 10' x 19'	3	88.00
FA12	E360087	12' x 18'	3	93.00
FA15	E360088	15' x 25'	3	98.00
FA20	E360089	20' x 30'	3	102.00
FA25	E360090	25' x 40'	3	103.00
FA30	E360091	30' x 50' or 30 x 60'	3	105.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Shock Spring & Safety Cable

On flagpoles that are utilizing an 8' x 12' flag arrangement or larger it is recommended that a shock spring with safety cable be used. the shock spring is constructed of zinc plated high carbon steel having an overall length of 5 ½" with the coiled section measuring 4". The 9" long safety cable is constructed of 1/8" stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps.

Model	Item #	Description	Price
IHSS	E360092	Shock Spring	$8.20
SCO	E360093	Safety Cable	3.20

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Stainless Steel Cable

Model	Item #	Diameter	Price Per Foot
			1'-199'	200'+
SSC32	E360330	3/32"	$1.10	$1.00
SSC18	E360094	1/8"	1.10	1.00
SSC316	E360095	3/16"	1.30	1.20

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Rope Assemblies These Assemblies are typically used in rope style internal halyard flagpoles where a cam cleat has been installed. Comes complete with a zinc plated carbon steel rope thimble attached to one end of the rope and stainless steel quick link.

Polypropylene

Height of Pole	Length of Rope	Diameter of Rope	White		Silver		Bronze #313		Black
			Item #	Price	Item #	Price	Item #	Price	Item #	Price
20'	50'	¼"	E360096	$16.00	E360106	$16.00	E360116	$16.00	E360126	$16.00
25'	60'	¼"	E360097	18.00	E360107	19.00	E360117	19.00	E360127	19.00
30'	70'	¼"	E360098	20.00	E360108	22.00	E360118	22.00	E360128	22.00
35'	80'	¼"	E360099	22.00	E360109	23.00	E360119	23.00	E360129	23.00
40'	90'	¼"	E360100	24.00	E360110	25.00	E360120	25.00	E360130	25.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

Nylon with Wire Center

Height of Pole	Length of Rope	Diameter of Rope	White		Silver		Bronze #313		Black
			Item #	Price	Item #	Price	Item #	Price	Item #	Price
20'	50'	3/16"	E360137	24.00	E360147	29.00	E360157	29.00	E360167	29.00
25'	60'	3/16"	E360138	29.00	E360148	35.00	E360158	35.00	E360168	35.00
30'	70'	3/16"	E360139	33.00	E360149	41.00	E360159	41.00	E360169	41.00
40'	80'	3/16"	E360140	38.00	E360150	47.00	E360160	47.00	E360170	47.00
40'	90'	3/16"	E360340	46.00	E360341	56.00	E360342	56.00	E360343	56.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Retainer Rings

Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag.

	Beaded Retainer Rings Constructed of either 1" or combination of 1" & 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. Complete with stainless steel quick link.
RR5 Through RR12		RR13 Through RR36

Model	Butt DIA. of Pole	DIA. of Balls	White		Silver		Bronze #313
			Item #	Price	Item #	Price	Item #	Price
RR5	5"	1"	E360176	$33.00	E360194	$40.00	E360212	$40.00
RR6	6"	1"	E360177	35.00	E360195	42.00	E360213	42.00
RR7	7"	1"	E360178	37.00	E360196	44.00	E360214	44.00
RR8	8'	1"	E360179	39.00	E360197	47.00	E360215	47.00
RR10	10"	1"	E360180	42.00	E360198	50.00	E360216	50.00
RR11	11"	1"	E360181	45.00	E360199	54.00	E360217	54.00
RR12	12"	1"	E360182	46.00	E360200	56.00	E360218	56.00
RR13	13"	1" & 2"	E360183	80.00	-	-	-	-
RR14	14"	1" & 2"	E360184	84.00	-	-	-	-
RR16	16"	1" & 2"	E360185	96.00	-	-	-	-
RR18	18"	1" & 2"	E360186	110.00	-	-	-	-
RR20	20"	1" & 2"	E360187	118.00	-	-	-	-
RR22	22"	1" & 2"	E360188	134.00	-	-	-	-
RR24	24"	1" & 2"	E360189	148.00	-	-	-	-
RR30	30"	1" & 2"	E360190	164.00	-	-	-	-
RR32	32"	1" & 2"	E360191	176.00	-	-	-	-
RR34	34"	1" & 2"	E360192	188.00	-	-	-	-
RR36	36"	1" & 2"	E360193	200.00	-	-	-	-

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Rope Retainer Rings Constructed of ¼" nylon wire center halyard with a zinc plated carbon steel thimble attached at each end with an aluminum crimp. Complete with stainless steel quick link. *If color is not specified when ordering, White will be supplied.

Model	Butt DIA. of Pole	White		Silver		Bronze #313		Black
		Item #	Price	Item #	Price	Item #	Price	Item #	Price
RRR5	5"	E360230	$14.00	E360239	$17.00	E360248	$17.00	E360257	$17.00
RRR6	6"	E360231	15.00	E360240	18.00	E360249	18.00	E360258	18.00
RRR65	6½"	E360232	16.00	E360241	19.00	E360250	19.00	E360259	19.00
RRR7	7"	E360233	17.00	E360242	21.00	E360251	21.00	E360260	21.00
RRR8	8'	E360234	18.00	E360243	22.00	E360252	22.00	E360261	22.00
RRR10	10"	E360235	19.00	E360244	23.00	E360253	23.00	E360262	23.00
RRR105	10½"	E360236	22.00	E360245	27.00	E360254	27.00	E360263	27.00
RRR115	11½"	E360237	24.00	E360246	30.00	E360255	30.00	E360264	30.00
RRR12	12"	E360238	26.00	E360247	32.00	E360256	32.00	E360265	32.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Nylon Retainer Ring Balls Drilled to be strung onto 1/8" stainless steel aircraft cable.

Item #	Diameter of Ball	Color	Price
E360266	1"	White	$0.52
E360267	1"	Silver	0.60
E360268	1"	Bronze	0.60
E360269	1 ½"	White	2.30
E360270	2"	White	3.20

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Internal Halyard Doors for Aluminum Flagpoles
with Lock & Keys

Model	Fits Pole DIA.	Height	Width	Wall	Silver		Clear		Bronze #313		White		Black
					Item #	Price	Item #	Price	Item #	Price	Item #	Price	Item #	Price
IHD6	6"	5 1/16"	3 1/16"	.125	E360271	78.00	E360276	84.00	E360335	84.00	E360281	84.00	E360286	84.00
IHD7	7"	6"	4"	.125	E360272	82.00	E360277	90.00	E360336	90.00	E360282	90.00	E360287	90.00
IHD8	8"	6 1/16"	4 1/16"	.188	E360273	88.00	E360278	97.00	E360337	97.00	E360283	97.00	E360288	97.00
IHD10	10"	6"	4 ¼"	.250	E360274	99.00	E360279	109.00	E360338	109.00	E360284	109.00	E360289	109.00
IHD12	12"	6"	4 ¼"	.188	E360275	109.00	E360280	120.00	E360339	120.00	E360285	120.00	E360290	120.00

*If color is not specified when ordering, Silver will be supplied.

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Lock & Keys for Internal Halyard Doors This lock is suited for any of the doors listed above.	Lock & Keys for Door & Frame Units Buy Me!
Model Item # Description Price IHCL E360291 Lock w/ 2 Keys $10.00 IHDK E360292 Key Only 3.00	Model Item # Description Price DFL E360303 Lock w/2 Keys $10.00 DFK E360304 Key Only 3.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Internal Halyard Door & Frame Units

This unit is designed for 5" diameter poles and is used with rope style internal halyard systems.
Each unit consists of a hinged door mounted to the front of the frame and a cam cleat (optional) mounted to the back of the frame.
The entire unit is inserted into the flagpole shaft and secured with ten ¼"-20NC stainless steel screws. Lock & keys included.

Description	Minimum Hole Opening	Silver		Clear		Bronze #313		White		Black
		Item #	Price	Item #	Price	Item #	Price	Item #	Price	Item #	Price
With Cam Cleat	5¼" & 3¼"	E360293	$106.00	E360295	$116.00	E360297	$116.00	E360299	$116.00	E360301	$116.00
Without Cam Cleat	5¼" & 3¼"	E360294	84.00	E360296	93.00	E360298	93.00	E360300	93.00	E360302	93.00

*If color is not specified when ordering, Silver will be supplied.

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Doors for Fiberglass Internal Halyard Poles
With Lock & Keys

Model	Item #	For Pole Model #	Color	Price
FIDH-1	E360305	FG25IH, FG30IH, FG35IH, FG39IH	White	$ 70.00
FIDH-2	E360306	FG25IH, FG30IH, FG35IH, FG39IH	Bronze	78.00
FIDH-3	E360307	FG50IH, FG60IH, FG70IH, FG78IH	White	154.00
FIDH-4	E360308	FG50IH, FG60IH, FG70IH, FG78IH	Bronze	170.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Door Locks & Keys for Fiberglass Internal Halyard Poles

Model	Item #	For Pole Model #	Price
FGL-1	E360309	Lock w/2 Keys For FG25IH, FG30IH, FG35IH, FG39IH	$ 6.50
FGK-1	E360310	Key Only for FG25IH, FG30IH, FG35IH, FG39IH	4.00
FGL-2	E360311	Lock w/2 Keys for FG50IH, FG60IH, FG70IH, FG78IH	6.50
FGK-2	E360312	Key Only for FG50IH, FG60IH, FG70IH, FG78IH	4.00

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Counterweights

Fabricated form 2" diameter steel and then coated with plastisol. The 3 ½" pound weights are supplied with one eyebolt
attached to one end while the 7 pound and 14 pound weights are supplied with an eyebolt attached to each end.

Model	Weight	Length	White		Silver		Bronze #313
			Item #	Price	Item #	Price	Item #	Price
CW35	3½" #	3½"	E360313	$26.00	E360316	$26.00	E360319	$26.00
CW7	7 #	7"	E360314	38.00	E360317	38.00	E360320	38.00
CW14	14 #	14"	E360315	48.00	E360318	48.00	E360321	48.00

*If color is not specified when ordering, White will be supplied.

Click Item Number To Add To Cart Note: You Can Remove It Later!

Cable & Rope Crimps

Model	Item #	For Cable or Rope DIA.	Material	Price
CC3	E360328	3/32"	Copper	$0.34
CC1	E360324	1/8"	Copper	0.34
CC2	E360325	5/32"	Copper	0.78
ARC1	E300326	¼" - 5/16"	Aluminum	1.20

Click Item Number To Add To Cart Note: You Can Remove It Later!

 

Copper Cable Stops Model Item # For Cable Diameter Price CS1 E360327 1/8" $0.34		Cable Swivel Connector Stainless Steel Model Item # Length Width Price IHCSC E360323 2¾" 11 1/16"" $4.00
Quick-Link Stainless Steel Model Item # Length Width Price SSQL E360329 3 7/8" 2 3/8" $8.00		Cable & Rope Thimbles IHTH-3 & IHTH-1 are Stainless Steel - IHTH-2 is Zinc Plated Steel Model Item # For Cable or Rope Dia. Price IHTH-3 E360331 3/32" $1.90 IHTH-1 E360322 1/8" - 5/32" 2.00 IHTH-2 E300238 ¼" - 5/16" 0.80

Click Item Number To Add To Cart Note: You Can Remove It Later!